dmesg - GPU test 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-39-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014 (Ubuntu 3.13.0-39.66-generic 3.13.11.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000967ff] usable
BIOS-e820: [mem 0x0000000000096800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf87ffff] usable
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffe2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe3000-0x00000000cffeffff] ACPI data
BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: HP-Pavilion NC683AA-ABA m9500y/Aspen, BIOS 5.13 05/07/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 000100000000 mask FFFF00000000 write-back
4 base 000200000000 mask FFFFE0000000 write-back
5 base 000220000000 mask FFFFF0000000 write-back
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf880 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4b80-0x000f4b8f] mapped at [ffff8800000f4b80]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000090000] 90000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
[mem 0x22fe00000-0x22fffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
[mem 0x22c000000-0x22fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
[mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcf87ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcf7fffff] page 2M
[mem 0xcf800000-0xcf87ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35b5e000-0x36da6fff]
ACPI: RSDP 00000000000f8b00 000024 (v02 HPQOEM)
ACPI: XSDT 00000000cffe30c0 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: FACP 00000000cffe7b40 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: DSDT 00000000cffe3280 004888 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
ACPI: FACS 00000000cffe0000 000040
ACPI: SSDT 00000000cffe7d00 000544 (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001)
ACPI: SLIC 00000000cffe8280 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: HPET 00000000cffe8500 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
ACPI: MCFG 00000000cffe8540 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: APIC 00000000cffe7c40 000084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fff9000-0x22fffdfff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00095fff]
node 0: [mem 0x00100000-0xcf87ffff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2095125
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3989 pages, LIFO batch:0
DMA32 zone: 13218 pages used for memmap
DMA32 zone: 845952 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1245184 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00096000-0x00096fff]
PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf880000-0xcffdffff]
PM: Registered nosave memory: [mem 0xcffe0000-0xcffe2fff]
PM: Registered nosave memory: [mem 0xcffe3000-0xcffeffff]
PM: Registered nosave memory: [mem 0xcfff0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88022fc00000 s86400 r8192 d24192 u524288
pcpu-alloc: s86400 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062366
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 14d6000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 8082008K/8380500K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 298492K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.480 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4786.96 BogoMIPS (lpj=9573920)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) 9750 Quad-Core Processor (fam: 10, model: 02, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19147.84 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcffe0000-0xcffe2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:35:36, date: 11/03/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [a000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
TOM2: 0000000230000000 aka 8960M
bus: [bus 00-05] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xe0600000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe05fffff]
bus: 00 [mem 0x230000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4392] type 00 class 0x010400
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:6613] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfda80000-0xfdabffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfdafc000-0xfdafffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [197b:2380] type 00 class 0x0c0010
pci 0000:02:00.0: reg 0x10: [mem 0xfd7ff000-0xfd7ff7ff]
pci 0000:02:00.0: reg 0x14: [mem 0xfd7fe000-0xfd7fe07f]
pci 0000:02:00.0: reg 0x20: [mem 0xfd7fd000-0xfd7fd07f]
pci 0000:02:00.0: reg 0x24: [mem 0xfd7fc000-0xfd7fc07f]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:03:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xfddf0000-0xfddfffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:05.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:04:00.0: [168c:002a] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xfdcf0000-0xfdcfffff 64bit]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:02 [mem 0xfd700000-0xfd7fffff]
e820: reserve RAM buffer [mem 0x00096800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf880000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:00: [io 0x4100-0x411f] has been reserved
system 00:00: [io 0x0228-0x022f] has been reserved
system 00:00: [io 0x040b] has been reserved
system 00:00: [io 0x04d6] has been reserved
system 00:00: [io 0x0b00-0x0b0f] has been reserved
system 00:00: [io 0x0c00-0x0c01] has been reserved
system 00:00: [io 0x0c14] has been reserved
system 00:00: [io 0x0c50-0x0c52] has been reserved
system 00:00: [io 0x0c6c-0x0c6d] has been reserved
system 00:00: [io 0x0c6f] has been reserved
system 00:00: [io 0x0cd0-0x0cd1] has been reserved
system 00:00: [io 0x0cd2-0x0cd3] has been reserved
system 00:00: [io 0x0cd4-0x0cdf] has been reserved
system 00:00: [io 0x4000-0x40fe] could not be reserved
system 00:00: [io 0x4210-0x4217] has been reserved
system 00:00: [io 0x0b10-0x0b1f] has been reserved
system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:00: [mem 0xfec00000-0xffffffff window] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0265-0x0266] has been reserved
system 00:06: [io 0x1000-0x10fe] has been reserved
system 00:06: [io 0x1100-0x11fe] has been reserved
system 00:06: [io 0x0290-0x0297] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:07: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:07: disabling [mem 0x00100000-0xcffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:07: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:07: [mem 0xcffe0000-0xcfffffff] could not be reserved
system 00:07: [mem 0xffff0000-0xffffffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xfda00000-0xfda1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:05.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18724K (ffff880035b5e000 - ffff880036da7000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x00000007)
microcode: CPU0: patch_level=0x01000095
microcode: CPU1: patch_level=0x01000095
microcode: CPU2: patch_level=0x01000095
microcode: CPU3: patch_level=0x01000095
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1415043336.548:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15950
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: e3c165d0891e3ceeb6dd5c18c7e1993cd24956b0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:301:596
rtc_cmos 00:03: setting system clock to 2014-11-03 19:35:37 UTC (1415043337)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[114]: starting version 204
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio ccc
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 44 for MSI/MSI-X
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000c7c000, 00:24:21:23:86:62, XID 1c4000c0 IRQ 44
r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
usb 1-1: New USB device found, idVendor=045e, idProduct=076d
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-5000
usb 1-1: Manufacturer: Microsoft
usb 1-4: new high-speed USB device number 3 using ehci-pci
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4.00: ATAPI: HP DVD Writer 1260d, KH25, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM HP DVD Writer 1260d KH25 PQ: 0 ANSI: 5
ata6.00: ATAPI: hp DVD-RAM GH40L, RB0E, max UDMA/100
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg0 type 5
ata6.00: configured for UDMA/100
ata7.00: ATA-8: SSD2SC240G5LC726B104-298, 560ABBF0, max UDMA/133
ata7.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
scsi 5:0:0:0: CD-ROM hp DVD-RAM GH40L RB0E PQ: 0 ANSI: 5
usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Hub
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
ata7.00: configured for UDMA/133
sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
sr 5:0:0:0: Attached scsi CD-ROM sr1
sr 5:0:0:0: Attached scsi generic sg1 type 5
scsi 6:0:0:0: Direct-Access ATA SSD2SC240G5LC726 560A PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 6:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 52 bits of entropy available
init: plymouth-upstart-bridge main process (189) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (199) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 2-2: new high-speed USB device number 2 using ehci-pci
init: plymouth-upstart-bridge main process (202) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
tsc: Refined TSC clocksource calibration: 2393.464 MHz
firewire_core 0000:02:00.0: created device fw0: GUID 0010dc00018fcd2a, S400
Adding 8378364k swap on /dev/sda5. Priority:-1 extents:1 across:8378364k SSFS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[342]: starting version 204
usb 2-2: New USB device found, idVendor=0bda, idProduct=0152
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: USB2.0-CRW
usb 2-2: Manufacturer: Generic
usb 2-2: SerialNumber: 20060413092100000
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3a
sp5100_tco: failed to find MMIO address, giving up.
MCE: In-kernel MCE decoding enabled.
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
EDAC MC: Ver: 3.0.0
random: nonblocking pool is initialized
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-5000 (045e:076d)
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usb 4-2: new low-speed USB device number 2 using ohci-pci
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-5000 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
fglrx: module verification failed: signature and/or required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
[fglrx] vendor: 1002 device: 6613 count: 1
[fglrx] ioport: bar 4, base 0xce00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.30.4 [Sep 15 2014] with 1 minors
type=1400 audit(1415043338.599:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=524 comm="apparmor_parser"
type=1400 audit(1415043338.599:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=524 comm="apparmor_parser"
type=1400 audit(1415043338.599:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=524 comm="apparmor_parser"
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
type=1400 audit(1415043338.639:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=557 comm="apparmor_parser"
type=1400 audit(1415043338.639:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser"
type=1400 audit(1415043338.639:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
type=1400 audit(1415043338.639:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser"
type=1400 audit(1415043338.639:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
type=1400 audit(1415043338.639:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
init: cups main process (549) killed by HUP signal
init: cups main process ended, respawning
usb-storage 2-2:1.0: USB Mass Storage device detected
hidraw: raw HID events driver (C) Jiri Kosina
scsi8 : usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 4-2: New USB device found, idVendor=040b, idProduct=2011
usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-2: Product: 2.4G wireless Mouse
hid-generic 0003:0BDA:0152.0001: hiddev0,hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW] on usb-0000:00:13.2-2/input1
input: 2.4G wireless Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input6
hid-generic 0003:040B:2011.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G wireless Mouse] on usb-0000:00:12.1-2/input0
hda_codec: ALC1200: SKU not ready 0x411111f0
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1c
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-4.1: new high-speed USB device number 5 using ehci-pci
init: failsafe main process (630) killed by TERM signal
usb 1-4.1: New USB device found, idVendor=154b, idProduct=005b
usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1: Product: USB 2.0 FD
usb 1-4.1: Manufacturer: PNY Technologies
usb 1-4.1: SerialNumber: AC8FHDD0500000193
usb-storage 1-4.1:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-4.1:1.0
Switched to clocksource tsc
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900116e0000, irq=18
usb 1-4.4: new high-speed USB device number 6 using ehci-pci
usb 1-4.4: New USB device found, idVendor=05e3, idProduct=0608
usb 1-4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4.4: Product: USB2.0 Hub
hub 1-4.4:1.0: USB hub found
hub 1-4.4:1.0: 4 ports detected
init: samba-ad-dc main process (793) terminated with status 1
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
usb 1-4.4.1: new high-speed USB device number 7 using ehci-pci
usb 1-4.4.1: New USB device found, idVendor=0930, idProduct=6545
usb 1-4.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.4.1: Product: USB Flash Memory
usb 1-4.4.1: Manufacturer:
usb 1-4.4.1: SerialNumber: 60A44CB46477ED61535C0059
usb-storage 1-4.4.1:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-4.4.1:1.0
usb 1-4.4.2: new low-speed USB device number 8 using ehci-pci
scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:2: Attached scsi generic sg5 type 0
sd 8:0:0:3: Attached scsi generic sg6 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
sd 8:0:0:1: [sdc] Attached SCSI removable disk
sd 8:0:0:2: [sdd] Attached SCSI removable disk
sd 8:0:0:3: [sde] Attached SCSI removable disk
usb 1-4.4.2: New USB device found, idVendor=045e, idProduct=00dd
usb 1-4.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.4.2: Product: Comfort Curve Keyboard 2000
usb 1-4.4.2: Manufacturer: Microsoft
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4.2/1-4.4.2:1.0/input/input16
hid-generic 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:12.2-4.4.2/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4.2/1-4.4.2:1.1/input/input17
hid-generic 0003:045E:00DD.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:12.2-4.4.2/input1
init: plymouth-upstart-bridge main process ended, respawning
usb 1-4.4.3: new full-speed USB device number 9 using ehci-pci
fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1194
[fglrx] Firegl kernel thread PID: 1195
[fglrx] Firegl kernel thread PID: 1196
[fglrx] IRQ 46 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f838000, size:4000
[fglrx] Reserved FB block: Unshared offset:f83c000, size:4c4000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:ffff3000, size:d000
usb 1-4.4.3: New USB device found, idVendor=0a12, idProduct=0001
usb 1-4.4.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-4.4.3: Product: Bluetooth2.1+EDR CLASS1
usbcore: registered new interface driver btusb
scsi 9:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg7 type 0
sd 9:0:0:0: [sdf] 63901440 512-byte logical blocks: (32.7 GB/30.4 GiB)
sd 9:0:0:0: [sdf] Write Protect is off
sd 9:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdf] No Caching mode page found
sd 9:0:0:0: [sdf] Assuming drive cache: write through
sd 9:0:0:0: [sdf] No Caching mode page found
sd 9:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1
sd 9:0:0:0: [sdf] No Caching mode page found
sd 9:0:0:0: [sdf] Assuming drive cache: write through
sd 9:0:0:0: [sdf] Attached SCSI removable disk
scsi 10:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg8 type 0
sd 10:0:0:0: [sdg] 121974144 512-byte logical blocks: (62.4 GB/58.1 GiB)
sd 10:0:0:0: [sdg] Write Protect is off
sd 10:0:0:0: [sdg] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdg] No Caching mode page found
sd 10:0:0:0: [sdg] Assuming drive cache: write through
sd 10:0:0:0: [sdg] No Caching mode page found
sd 10:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
sd 10:0:0:0: [sdg] No Caching mode page found
sd 10:0:0:0: [sdg] Assuming drive cache: write through
sd 10:0:0:0: [sdg] Attached SCSI removable disk
FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
2:3:1: cannot get freq at ep 0x82
usbcore: registered new interface driver snd-usb-audio
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-splash main process (1858) terminated with status 1
ata7: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
ata7: SError: { HostInt }
ata7: hard resetting link
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: configured for UDMA/133
ata7: EH complete
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1415043369.931:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2707 comm="apparmor_parser"
type=1400 audit(1415043369.931:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2707 comm="apparmor_parser"
type=1400 audit(1415043369.931:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2707 comm="apparmor_parser"
type=1400 audit(1415044830.695:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4062 comm="apparmor_parser"
type=1400 audit(1415044830.695:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4062 comm="apparmor_parser"
type=1400 audit(1415044830.695:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4062 comm="apparmor_parser"
systemd-hostnamed[5229]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 6:0:0:0: [sda] Synchronizing SCSI cache
sd 6:0:0:0: [sda] Stopping disk
[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed!
[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000
[fglrx] IRQ 46 Disabled
[fglrx] Preparing suspend fglrx in kernel.
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of devices complete after 454.043 msecs
PM: late suspend of devices complete after 0.341 msecs
pcieport 0000:00:05.0: System wakeup enabled by ACPI
ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.1: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.1: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 62.707 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 22
smpboot: CPU 1 is now offline
Broke affinity for irq 17
Broke affinity for irq 19
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 1001123041 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
Switched to clocksource hpet
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:12.1: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.1: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 138.289 msecs
PM: early resume of devices complete after 0.195 msecs
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
usb usb4: root hub lost power or was reset
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 46 Enabled
pcieport 0000:00:05.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
usb usb3: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb6: root hub lost power or was reset
usb usb5: root hub lost power or was reset
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4.00: configured for UDMA/100
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/100
ata7.00: configured for UDMA/133
sd 6:0:0:0: [sda] Starting disk
usb 4-2: reset low-speed USB device number 2 using ohci-pci
firewire_core 0000:02:00.0: rediscovered device fw0
PM: resume of devices complete after 865.623 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
sr 3:0:0:0: [sr0] Device not ready
sr 3:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 3:0:0:0: [sr0]
Sense Key : Not Ready [current]
sr 3:0:0:0: [sr0]
Add. Sense: Medium not present - tray closed
sr 3:0:0:0: [sr0] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 8
Buffer I/O error on device sr0, logical block 9
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 5:0:0:0: [sr1] Device not ready
sr 5:0:0:0: [sr1]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 5:0:0:0: [sr1]
Sense Key : Not Ready [current]
sr 5:0:0:0: [sr1]
Add. Sense: Medium not present - tray closed
sr 5:0:0:0: [sr1] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr1, sector 0
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
systemd-hostnamed[8978]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sr 3:0:0:0: [sr0] Device not ready
sr 3:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 3:0:0:0: [sr0]
Sense Key : Not Ready [current]
sr 3:0:0:0: [sr0]
Add. Sense: Medium not present - tray closed
sr 3:0:0:0: [sr0] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr0, sector 0
quiet_error: 54 callbacks suppressed
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 8
Buffer I/O error on device sr0, logical block 9
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 5:0:0:0: [sr1] Device not ready
sr 5:0:0:0: [sr1]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 5:0:0:0: [sr1]
Sense Key : Not Ready [current]
sr 5:0:0:0: [sr1]
Add. Sense: Medium not present - tray closed
sr 5:0:0:0: [sr1] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr1, sector 0
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] Device not ready
sr 5:0:0:0: [sr1]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 5:0:0:0: [sr1]
Sense Key : Not Ready [current]
sr 5:0:0:0: [sr1]
Add. Sense: Medium not present - tray closed
sr 5:0:0:0: [sr1] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr1, sector 0
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 3:0:0:0: [sr0] Device not ready
sr 3:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 3:0:0:0: [sr0]
Sense Key : Not Ready [current]
sr 3:0:0:0: [sr0]
Add. Sense: Medium not present - tray closed
sr 3:0:0:0: [sr0] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr0, sector 0
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
systemd-hostnamed[9145]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sr 3:0:0:0: [sr0] Device not ready
sr 3:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 3:0:0:0: [sr0]
Sense Key : Not Ready [current]
sr 3:0:0:0: [sr0]
Add. Sense: Medium not present - tray closed
sr 3:0:0:0: [sr0] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr0, sector 0
quiet_error: 118 callbacks suppressed
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 8
Buffer I/O error on device sr0, logical block 9
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 5:0:0:0: [sr1] Device not ready
sr 5:0:0:0: [sr1]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 5:0:0:0: [sr1]
Sense Key : Not Ready [current]
sr 5:0:0:0: [sr1]
Add. Sense: Medium not present - tray closed
sr 5:0:0:0: [sr1] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr1, sector 0
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
systemd-hostnamed[9595]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 6:0:0:0: [sda] Synchronizing SCSI cache
sd 6:0:0:0: [sda] Stopping disk
[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed!
[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000
[fglrx] IRQ 46 Disabled
[fglrx] Preparing suspend fglrx in kernel.
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of devices complete after 461.753 msecs
PM: late suspend of devices complete after 0.387 msecs
pcieport 0000:00:05.0: System wakeup enabled by ACPI
ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.1: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.1: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 62.336 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 19
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 16
Broke affinity for irq 17
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:12.1: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.1: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 124.715 msecs
PM: early resume of devices complete after 0.229 msecs
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
pcieport 0000:00:05.0: System wakeup disabled by ACPI
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
usb usb6: root hub lost power or was reset
usb usb5: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb3: root hub lost power or was reset
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 46 Enabled
usb usb7: root hub lost power or was reset
ata8: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata7.00: configured for UDMA/133
sd 6:0:0:0: [sda] Starting disk
usb 4-2: reset low-speed USB device number 2 using ohci-pci
firewire_core 0000:02:00.0: rediscovered device fw0
PM: resume of devices complete after 874.614 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sr 3:0:0:0: [sr0] Device not ready
sr 3:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 3:0:0:0: [sr0]
Sense Key : Not Ready [current]
sr 3:0:0:0: [sr0]
Add. Sense: Medium not present - tray closed
sr 3:0:0:0: [sr0] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr0, sector 0
quiet_error: 54 callbacks suppressed
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 8
Buffer I/O error on device sr0, logical block 9
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 3:0:0:0: [sr0] unaligned transfer
sr 5:0:0:0: [sr1] Device not ready
sr 5:0:0:0: [sr1]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 5:0:0:0: [sr1]
Sense Key : Not Ready [current]
sr 5:0:0:0: [sr1]
Add. Sense: Medium not present - tray closed
sr 5:0:0:0: [sr1] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sr1, sector 0
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
sr 5:0:0:0: [sr1] unaligned transfer
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
2:3:1: cannot get freq at ep 0x82
systemd-hostnamed[14746]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!